linuxserver/mullvad-browser
The Mullvad Browser is a privacy-focused web browser developed in a collaboration between Mullvad VPN and the Tor Project. It’s designed to minimize tracking and fingerprinting. You could say it’s a Tor Browser to use without the Tor Network. Instead, you can use it with a trustworthy VPN.
Simply pulling
lscr.io/linuxserver/mullvad-browser:latest
should retrieve the correct image for your arch, but you can also pull specific arch images via tags.The architectures supported by this image are:
Architecture | Available | Tag |
---|---|---|
x86-64 | ✅ | amd64-<version tag> |
arm64 | ❌ | |
armhf | ❌ | |
The application can be accessed at:
- http://yourhost:3000/
- https://yourhost:3001/
Generate a Wireguard conf from your VPN provider and copy it into the /config mount with a name of
wg0.conf
. If a valid conf is found at startup, the container will connect to the VPN and route all traffic over it. This container is not designed for routing other containers traffic and should only be used standlone.When routing traffic via Wireguard you will typically lose access to the webUI. For simple LAN environments you can set the
LOCAL_NET
environment variable and we will configure routing for you.If you have more complex network setup, you will need to manually exclude your local networks from being routed via Wireguard by modifying your
wg0.conf
like so, modifying the HOMENET subnets to match your LAN range(s):[Interface]
PrivateKey = <private key>
Address = 9.8.7.6/32
DNS = 8.8.8.8
PostUp = DROUTE=$(ip route | grep default | awk '{print $3}'); HOMENET=192.168.0.0/16; HOMENET2=10.0.0.0/8; HOMENET3=172.16.0.0/12; ip route add $HOMENET3 via $DROUTE;ip route add $HOMENET2 via $DROUTE; ip route add $HOMENET via $DROUTE;iptables -I OUTPUT -d $HOMENET -j ACCEPT;iptables -A OUTPUT -d $HOMENET2 -j ACCEPT; iptables -A OUTPUT -d $HOMENET3 -j ACCEPT; iptables -A OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT
PreDown = HOMENET=192.168.0.0/16; HOMENET2=10.0.0.0/8; HOMENET3=172.16.0.0/12; ip route del $HOMENET3 via $DROUTE;ip route del $HOMENET2 via $DROUTE; ip route del $HOMENET via $DROUTE; iptables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT; iptables -D OUTPUT -d $HOMENET -j ACCEPT; iptables -D OUTPUT -d $HOMENET2 -j ACCEPT; iptables -D OUTPUT -d $HOMENET3 -j ACCEPT
This container is based on Docker Baseimage KasmVNC which means there are additional environment variables and run configurations to enable or disable specific functionality.
Variable | Description |
---|---|
CUSTOM_PORT | Internal port the container listens on for http if it needs to be swapped from the default 3000. |
CUSTOM_HTTPS_PORT | Internal port the container listens on for https if it needs to be swapped from the default 3001. |
CUSTOM_USER | HTTP Basic auth username, abc is default. |
PASSWORD | HTTP Basic auth password, abc is default. If unset there will be no auth |
SUBFOLDER | Subfolder for the application if running a subfolder reverse proxy, need both slashes IE /subfolder/ |
TITLE | The page title displayed on the web browser, default "KasmVNC Client". |
FM_HOME | This is the home directory (landing) for the file manager, default "/config". |
START_DOCKER | If set to false a container with privilege will not automatically start the DinD Docker setup. |
DRINODE | If mounting in /dev/dri for DRI3 GPU Acceleration allows you to specify the device to use IE /dev/dri/renderD128 |
Variable | Description |
---|---|
--privileged | Will start a Docker in Docker (DinD) setup inside the container to use docker in an isolated environment. For increased performance mount the Docker directory inside the container to the host IE -v /home/user/docker-data:/var/lib/docker . |
-v /var/run/docker.sock:/var/run/docker.sock | Mount in the host level Docker socket to either interact with it via CLI or use Docker enabled applications. |
--device /dev/dri:/dev/dri | Mount a GPU into the container, this can be used in conjunction with the DRINODE environment variable to leverage a host video card for GPU accelerated appplications. Only Open Source drivers are supported IE (Intel,AMDGPU,Radeon,ATI,Nouveau) |
This container is capable of delivering a true lossless image at a high framerate to your web browser by changing the Stream Quality preset to "Lossless", more information here. In order to use this mode from a non localhost endpoint the HTTPS port on 3001 needs to be used. If using a reverse proxy to port 3000 specific headers will need to be set as outlined here.
To help you get started creating a container from this image you can either use docker-compose or the docker cli.
---
version: "2.1"
services:
mullvad-browser:
image: lscr.io/linuxserver/mullvad-browser:latest
container_name: mullvad-browser
cap_add:
- NET_ADMIN
security_opt:
- seccomp:unconfined #optional
environment:
- PUID=1000
- PGID=1000
- TZ=Etc/UTC
- LOCAL_NET=192.168.0.0/16 #optional
volumes:
- /path/to/config:/config
ports:
- 3000:3000
- 3001:3001
shm_size: "1gb"
restart: unless-stopped
docker run -d \
--name=mullvad-browser \
--cap-add=NET_ADMIN \
--security-opt seccomp=unconfined `#optional` \
-e PUID=1000 \
-e PGID=1000 \
-e TZ=Etc/UTC \
-e LOCAL_NET=192.168.0.0/16 `#optional` \
-p 3000:3000 \
-p 3001:3001 \
-v /path/to/config:/config \
--shm-size="1gb" \
--restart unless-stopped \
lscr.io/linuxserver/mullvad-browser:latest
Docker images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate
<external>:<internal>
respectively. For example, -p 8080:80
would expose port 80
from inside the container to be accessible from the host's IP on port 8080
outside the container.Parameter | Function |
---|---|
3000 | Mullvad Browser GUI. |
3001 | Mullvad Browser GUI HTTPS. |
Env | Function |
---|---|
PUID=1000 | for UserID - see below for explanation |
PGID=1000 | for GroupID - see below for explanation |
TZ=Etc/UTC | |
LOCAL_NET=192.168.0.0/16 | If using a VPN, set this to your local LAN IP range using CIDR notation. Without it you will be unable to access the web interface. If you have multiple ranges or a complex LAN setup you will need to manage this yourself in the wg0.conf, see the App Setup section for details. |
Volume | Function |
---|---|
/config | Users home directory in the container, stores local files and settings |
Parameter | Function |
---|---|
--shm-size= | This is needed for any modern website to function like youtube. |
--security-opt seccomp=unconfined | For Docker Engine only, many modern gui apps need this to function on older hosts as syscalls are unknown to Docker. |
This image utilises
cap_add
or sysctl
to work properly. This is not implemented properly in some versions of Portainer, thus this image may not work if deployed through Portainer.You can set any environment variable from a file by using a special prepend
FILE__
.As an example:
-e FILE__PASSWORD=/run/secrets/mysecretpassword
Will set the environment variable
PASSWORD
based on the contents of the /run/secrets/mysecretpassword
file.For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional
-e UMASK=022
setting. Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up here before asking for support.When using volumes (
-v
flags), permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user PUID
and group PGID
.Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.
In this instance
PUID=1000
and PGID=1000
, to find yours use id user
as below: $ id username
uid=1000(dockeruser) gid=1000(dockergroup) groups=1000(dockergroup)
We publish various Docker Mods to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.
- Shell access whilst the container is running:
docker exec -it mullvad-browser /bin/bash
- To monitor the logs of the container in realtime:
docker logs -f mullvad-browser
- Container version number
docker inspect -f '{{ index .Config.Labels "build_version" }}' mullvad-browser
- Image version number
docker inspect -f '{{ index .Config.Labels "build_version" }}' lscr.io/linuxserver/mullvad-browser:latest
- 03.04.23: - Initial release.
Last modified 1mo ago